Bathroom Exhaust Fan Pflugerville. When it comes to the exhaust fan in your bathroom, this is a feature that is much more important than you may think. This is because the fan is designed to help get rid of moisture, odors, and various airborne contaminants. If the fan is covered in dust, it will never work properly, and as a result, it can lead to mold, mildew, and other dangerous issues. This means that cleaning the fan on an annual basis is an important step to take to prevent these issues from happening.

The first step involved with this process is to remove the vent cover. Prior to this, make sure that the power to the fan is turned off. If you have a fan that’s only a vent with no light, simply remove the cover by pulling down on it gently before then squeezing the mental mounting wires together. From there, slide them out of their respective slots, which will remove them from the housing.

Next up is to clean the vent cover itself. This is a rather easy step, as you will only need to fill your sink with warm water and a few drops of dishwashing soap. From there, soak the cover for a few minutes before then using either a brush or cloth to scrub it clean. Then, place the cover on a towel and allow it to air dry. On the other hand, if your fan has a light, all you need to do is vacuum off the dust and wipe it clean.

It is also possible to clean the fan without removing the motor, as this only requires a vacuum with a crevice attachment in order to remove most of the dust. From there, switch over to a brush attachment for the fan housing and motor components. Once the dust has been removed, use a damp microfiber cloth and wipe down the housing and components.

Bathroom Exhaust Fan Pflugerville. The next step is to reassemble the fan. Simply plug it in and replace the cover by inserting all of the mounting wires back into their slots before then pushing the cover back into place gently.